This high-quality, performance engineered diverter valve is designed to replace the factory plastic diverter valve, which is a common source of boost leaks. Unlike the OEM valves, which use a fragile rubber diaphragm that is prone to failure, the 034Motorsport Diverter Valve features a high-performance spring and piston design. This means that the valve lasts much longer, and is capable of handling increased boost pressure.

The 034Motorsport Bypass Valve is fully serviceable and rebuildable.

This high-quality, performance engineered diverter valve is designed to replace the factory plastic diverter valve, which is a common source of boost leaks. Unlike the OEM valves, which use a fragile rubber diaphragm that is prone to failure, the 034Motorsport Diverter Valve features a high-performance spring and piston design. This means that the valve lasts much longer, and is capable of handling increased boost pressure.

The 034Motorsport Bypass Valve is fully serviceable and rebuildable.

We're pleased to offer this high-temperature silicone replacement N75 Hose for the B5/B6 Audi A4 1.8T and B5/B5.5 Volkswagen Passat 1.8T! Each vehicle has two of these hoses! One hose runs from the N75 valve to the wastegate actuator, and the other hose runs from the N75 valve to the compressor housing.

This secondary air injection (SAI) block off plate is designed for 1.8T cylinder heads with the secondary air injection system removed. Features the 034Motorsport logo on one side, and a precision machined o-ring seat on the other.

Please Note: Removing your SAI system will cause check engine codes, proper programming and/or resistors may be required to turn these codes off. For off road use only.

The 034 check valve is a high quality spring-loaded ball-style unit designed for simple bolt-on installation for the Audi AAN I5 20VT, Audi/Seat/Volkswagen 1.8T, Audi 2.7T, and many others. Features a CNC-machined billet aluminum housing with stainless steel ball-bearing and spring.

034Motorpsort's billet PCV check valve serves as a simple, elegant, indestructible replacement for the problematic OEM Audi/Volkswagen plastic valve (035 103 245A).

These CNC machined billet aluminum adapter plates allow you to install newer, more reliable 2.0T FSI coils on your 1.8T 20V, 2.7T 30V, or 4.2L 40V.

Installation hardware is included!

This snub bracket is designed for the included Polyurethane Snub Mount, and unlike other snub mount kits on the market that allow an "air gap" around the mount, our mount fits tightly inside the bracket for a tight precision fit.

Fully Reinforced Silicone Replacement 1.8T PCV Check Valve T-Hose for Longitudinal and Transverse 1.8T Engines.

Precision Stamped and Bent 304 Stainless Steel Coil Cover With Hardware To Clean Up and Protect Your Audi & Volkswagen 1.8T Coil Packs From Extreme Heat.

034Motorsport's billet aluminum block breather adapter for the 1.8T is precision CNC machined in-house to ensure unsurpassed quality and perfect fitment.

Fully reinforced silicone breather hose is designed to replace the crumbling, leaking OEM rubber part. Prevent boost leaks and replace a common failure point with this durable, performance engineered part made from high-quality automotive silicone.

This hose runs from the bottom of the intake manifold to the check valve attached to the lower block breather hose.

Precision Stamped and Bent 304 Stainless Steel Coil Cover With Hardware To Clean Up and Protect Your Audi & Volkswagen 1.8T Coil Packs From Extreme Heat.

This performance polyurethane snub mount fits most late-model Audi vehicles manufactured after 2002, and is designed to increase stabilization of the motor under acceleration.

Our 70 durometer polyurethane snub mount is a direct replacement for the stock snub mount, and offers much longer life and drastically improved performance by reducing unwanted engine movement.

034Motorsport Street Density and Track Density Transmission Mounts for the 5-MT B6 Audi A4 are now available! These mounts are offer a substantial reduction in drivetrain movement over the factory transmission mount, resulting in improved shift quality and throttle response. Torque Specifications - Tighten M8 Bolts to 25 Nm with Blue Loctite - Tighten M10 Bolt to 70 Nm

034Motorsport's high-quality silicone PRV (Pressure Regulating Valve) Pipe to Turbo Inlet Hose for the early B5/B6 Audi 1.8T. The factory hose is a very common point of failure, and almost always rips when removing the turbo inlet hose or PRV. Constructed from 4-ply high-temperature automotive grade silicone, will not crumble apart or rip like the factory rubber hose.

034Motorsport's high-quality silicone PRV Pipe to Turbo Inlet Hose for B6 1.8T.

Constructed from 4-ply high-temperature automotive grade silicone, this will not crumble apart or rip like the factory rubber hose.

This complete silicone hose kit is designed to replace all of the crumbling plastic and rubber awfulness that is the factory breather hose system. Fits 2004-2005 B6 Audi A4 1.8T models with the AMB engine code with VIN 8E-3-500000 and up. Includes all hardware needed to retrofit to a much simpler and more reliable breather system design.

Phenolic intake manifold spacer for the 1.8T, 10mm thick, includes 2 OE gaskets and longer hardware for an easy, quick install.

Phenolic intake manifold spacer for the 1.8T, 10mm thick, includes 2 OE gaskets and longer hardware for an easy, quick install.

Detta är en uppsättning reservdelar för vår avgaskollektor för 1.8T-motorer. Detta kit innehåller 3 utbytesbultar, en utbyteslåsplatta och en utbytespackning mellan turbo och kollektor.

Installationsinsats: LÄTT

This Silicone Replacement PCV L-Hose runs from the suction jet pump to the intake manifold on most B5/B6 Audi A4 1.8T models produced from 1998 - 2003.

With time, the OEM rubber hose becomes very prone to cracking, causing your engine to idle poorly and resulting in check engine lights from vacuum leaks. Unlike the factory part, our replacement hose is manufactured from high temperature silicone for long life.

These adaptors are CNC machined from alloy billets and will eradicate the issues of the original plastic block connections breaking.

This complete silicone hose kit is designed to replace all of the crumbling plastic and rubber awfulness that is the factory breather hose system.

This complete silicone hose kit is designed to replace all of the crumbling plastic and rubber awfulness that is the factory breather hose system.  Includes all hardware needed to retrofit to a much simpler and more reliable breather system design.

Fits 2003 B6 Audi A4 1.8T models with the AMB engine code in VIN range 8E-3-040000 > 8E-3-500000, and 2003 - 2005 Volkswagen Passat 1.8T models with the AWM engine code.

Phenolic intake manifold spacer for the 1.8T, 10mm thick, includes 2 OE gaskets and longer hardware for an easy, quick install.

The VW and Audi 1.8T engine, due to the proximity of the coils on the valve cover near the exhaust, suffer from harness degredation. Our harness solution uses automotive grade wiring and harness building materials designed to withstand years of abuse and offer an affordable, elegant solution.

Replacement EGR hose for B5 and B6 1.8T A4, this is a common failure hose from the factory, now made from high temp silicone for long life.

Replaces factory hose 058 103 493A